Select Boot Mode and by pressing the right on RC set the boot mode:.Save Info to USB - saving data of window 'Device Information' to the USB drive (you must first create folder mag256 on the root of the USB drive and connect the USB drive to STB).īe sure that the USB drive file system is FAT32.Userfs Image v ersion - the version of User settings (UserFS - the part of the image file).Image description - the additional description of the firmware version.Image date - Date and Time of firmware version c reation.Image version number - version of firmware.
BootLoader version - BootLoader version (if the second bootloader is on, then you will see the second bootloader version).MAC address - Physical address of network interface.Serial Number - Serial number of device (STB).Hardware Version - Version of the system board.Choose Device information - by pressing OK on RC:.Graphic Resolution - graphics window resolution of STB video output.ĭescription of these parameters is provided in section Video Output Mode and Graphic Resolution.System Restore Utility menu contains the following settings: To correctly display video signal on TV after STB software loaded, it is possible to set proper video output parameters at the boot stage.
Setting up video output mode and graphics display resolution
